Powerful 4500 lumen LED light. Latest COB LED array technology
96 (+/-1) CRI (color rendering index) that mimics natural sunlight
Auto Bright mode adjusts from 10% to 100% (450 to 4500 lumens) to preserve your eye’s natural night vision and extends battery life
Auto Flash Detect mode. Light turns off for 1 second when detecting external flash
One button control for easy operation. One button to power light on/off and select brightness
Five brightness modes: 100%, 75%, 50%, 25% and Auto mode (10% to 100%)
Hidden emergency signal mode. 1 sec blink interval and SOS Morse code. Push and hold power button for 4 seconds to activate (from off state)
4 hour burn time at 1000 lumens and constant brightness (1 hour burn time at full power)
Easy to expand with YS or Flex-Connect™ mounting system of arms, grips, trays and adapters.
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle evenly illuminates the subject with no hot spots.
Depth tested to 330ft (100m)
Corrosion-proof metal light head for heat dispersion and durability
Removable 50W Li-Ion battery w/ charger and international plug adapters included
||Anodized machined aluminum
|Light Source/Bulb Type
||1 x COB LED array (COB – Chip On Board)
||4500 lumens (maintains 4500 lumens throughout burn time at full power)
||4 ft/1.2 m (depends on camera model and visibility)
||Full power (100%), 75%, 50%, 25%, and Auto (10%-100%)
||Long push (1 sec) to power light on/off; Short push cycles through brightness modes
||Constant light or emergency signal light (activated by long push of power button)
|Color Rendering Index*
||120 degrees (90-degrees underwater)
||Lithium Ion 14.8V, 3400 mAh, 50Wh (included)
|Battery Charge Time
||2 hours 15 minutes
||4 hours at 25% brightness (100 lumens) and 1 hour at full power
||Tested to 330 feet/100 meters
||5.6″ length x 2.4″ diameter (14.2cm x 6.1cm), head only
||17.7oz (503g) head only without battery ; 26oz (737g) head with battery
||Dual NBR o-rings (lube included)
*CRI is a measure of a light source’s ability to show object colors “realistically” or “naturally” compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.