Menu
0
Laagste prijs garantie
Gratis verzending va. € 50 in Nederland en België
Snelle levering wereldwijd
Beoordeeld met een 9.1
€675,00
In winkelwagen
Apeks XTX50 / XTX40 Stage 3 Set
Apeks XTX50 / XTX40 Stage 3 Set
Apeks XTX50 / XTX40 Stage 3 Set
Apeks XTX50 / XTX40 Stage 3 Set

Apeks XTX50 / XTX40 Stage 3 Set

€675,00Incl. btw

€557,85 Excl. btw
Op voorraad

The XTX50 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. Lees meer..

1 tot 2 werkdagen
  • Laagste prijs garantie

    Wij bieden de laagste prijs garantie. Hetzelfde product ergens anders goedkoper gezien? Neem dan contact met ons op!
  • Snelle levering

    We bieden een snelle levering.
  • Gratis verzending vanaf €50,-

    Gratis verzending vanaf €50 in Nederland en België
  • 14 dagen retourbeleid

    Retourneren kan gemakkelijk binnen 14 dagen

Productomschrijving

The XTX50 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick and simple and can be performed by any APEKS Authorised Service Technician.

The XTX50 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator).

The XTX50 regulator incorporates a new two-shot high strength plastic front cover, improving the durability of the most vulnerable part of the demand valve.

The new ergonomic Venturi lever of the XTX50 has been designed to reduce the amount of grit ingress.

A new swivel hose connection is available at an extra cost. This allows the demand valve end of the hose connection to rotate and pivot, providing a more comfortable fit.

A new silicone exhaust valve has been used on the XTX50 regulator improving breathing performance.

XTX40 Octopus

The XTX40 Octopus provides the same features and performance as the XTX40 second stage and includes left / right hand reversibility. It comes with a high visibility yellow front cover and a 36” yellow hose. Suitable for cold water use (below 10 C / 50 F).

First Stage:

  • Uses the DST first stage
  • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
  • 2 HP ports and 4 MP ports on a rotating turret are angled for optimum hose routing
  • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

Second Stage

  • Pneumatically-balanced second stage results in smooth, easy breathing.
  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
  • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
  • Easy-to-grip opening effort control knob keeps the diver in control.
  • The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
  • A silicone exhaust valve improves the breathing performance of the regulator.
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

XTX40 Octopus

  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
  • Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.
  • Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
  • Suitable for coldwater use (below 10 C / 50 F).
  • Compatible with EAN40 out of the box.
  • Pneumatically-balanced second stage results in smooth, easy breathing.
  • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
  • Manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
  • A silicone exhaust valve improves the breathing performance of the regulator.
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.

Reviews

1 beoordeling
antoine.ballereauGeplaatst op 21 Maart 2019 at 15:57

Very happy with service and product.
Received just before my diving trip to Asia, very fast shipment and excellent communication. Super smooth breathing, just perfect!
I will buy again.
Thank you guys!

Specificaties

Artikelnummer
266760
EAN Code
5055538800832

Specificaties

Artikelnummer
266760
EAN Code
5055538800832

XTX50 / XTX40 Stage 3 Set

1 beoordeling
antoine.ballereauGeplaatst op 21 Maart 2019 at 15:57

Very happy with service and product.
Received just before my diving trip to Asia, very fast shipment and excellent communication. Super smooth breathing, just perfect!
I will buy again.
Thank you guys!

Beoordeel Apeks XTX50 / XTX40 Stage 3 Set

The XTX50 regulator can be converted from a right handed hose configuration (as supplied from the AP..

Meld u aan voor onze nieuwsbrief

Abonneer

Account aanmaken

Door een account aan te maken in deze winkel kunt u het betalingsproces sneller doorlopen, meerdere adressen opslaan, bestellingen bekijken en volgen en meer.

Registreren

Recent toegevoegd

U heeft geen artikelen in uw winkelwagen

Totaal incl. btw:€0,00
Bestel nog voor €50,00 en de verzending is gratis